[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: AUDITORY Digest - 10 Nov 2001 to 11 Nov 2001 (#2001-199)

To: AUDITORY@xxxxxxxxxxxxxxx
Subject: Re: AUDITORY Digest - 10 Nov 2001 to 11 Nov 2001 (#2001-199)
From: Amanda Lauer <alauer@xxxxxxxxxxxx>
Date: Mon, 12 Nov 2001 08:37:52 -0500
Delivery-date: Mon Nov 12 08:58:55 2001
Reply-to: Amanda Lauer <alauer@xxxxxxxxxxxx>
Sender: AUDITORY Research in Auditory Perception <AUDITORY@xxxxxxxxxxxxxxx>

I need some help finding some electrical supplies. I am looking for flexible wire, similar to what is often attached to headphones.  The wire needs to be small enough to solder to LEDs. I attach the LEDs to microswitches to form keys that small birds peck.  The problem with the wire I currently use is that it is very fragile and breaks away from the LED.  Also, it is stiff, so often it gets bent from a bird's vigorous pecking.  This can put pressure on the microswitch, making it difficult to peck, or it can go the other way and cause the microswitch to constantly be pressed.  Can anyone recommend a place where I may purchase flexible wire? I've looked at Home Depot, Radio Shack, and a local electronics shop--all with no luck.  Thanks.

Amanda Lauer
Graduate Student
University of Maryland

Prev by Date: Merit estimations from paired comparison tests
Next by Date: symposium on sound design
Previous by thread: Merit estimations from paired comparison tests
Next by thread: symposium on sound design
Index(es):
- Date
- Thread